Skip to content

CSLB C-17 licensed. Free in-home window estimates: (909) 787-1187

(909) 787-1187

ServicesWindow Installation

Window Installation in Walnut, CA

We install windows in additions, remodels and rebuilt openings. Each one goes in level, flashed against water and fitted with the right safety glass. While we work, we keep glass handling, ladders and dust under control around your home and your family.

Installer in a tool belt pressing black flashing tape around a new white vinyl window set in a house wall wrapped in white building paper, ladder at left

New openings need more than a new window

Window installation is for openings that are new or rebuilt. Think of a room addition, an ADU, a remodel that moves or widens a window, or a full-frame job where the old frame comes out down to the studs. If your openings are sound and you just want better windows, our Window Replacement or Window Retrofitting pages are likely a better fit.

We bring 30 years of window installation experience to this work. Most of what keeps a window from leaking happens before the glass goes in: the sill pan, the flashing laps, the shims and the sealant. We take our time on the parts you never see.

Safety comes first on every job. That means safe ladders, careful glass handling and a clean work area. It also means the finished window is safe to live with: tempered where it should be, and big enough to climb out of in a bedroom.

Worker in a cap and tool belt points to a cracked lower window pane on a stucco house wall as the homeowner looks on, with a ladder against the eave

What the job includes

  1. 01

    A close look at the opening first

    Our tape goes on every rough opening, and we check whether it sits plumb and true. We also look at the header and framing overhead. Any problem gets raised with you while the window can still be built around it.

  2. 02

    Safety glass where code calls for it

    Glass near doors, beside tubs and showers, and in large panes close to the floor needs to be tempered. We mark those spots on the order so the right glass arrives.

  3. 03

    Bedroom escape sizing

    A bedroom window has to open wide enough for a person to get out in a fire. We pick the size and style so new bedroom windows meet that rule.

  4. 04

    Flashing and water control

    We set a sloped sill pan, lap the flashing tape over the building paper like shingles, and tie it into the stucco or siding. If water ever gets behind the trim, it has a way back out.

  5. 05

    Trim, sealing and cleanup

    We close up around the frame with trim or a stucco patch as the job needs, then seal the joints. Packaging and scrap leave with us, and we open and lock every new window with you before we go.

Questions about Window Installation?

Call(909) 787-1187

When window installation is the right call

  • You are adding a room or an ADU

    New walls need new windows set into new openings. We can work with your builder on rough opening sizes early so everything fits.

  • The frame or wall around it is rotted

    Soft wood, stains on the drywall under the sill or swollen trim mean water has been getting in. A full-frame install lets us open it up, see the damage and fix how the water gets managed.

  • Your remodel moves or widens a window

    A bigger kitchen window or a new spot in a family room means a new opening. That calls for full installation, not a simple swap.

  • A bedroom window is too small to climb out of

    Older or converted bedrooms sometimes have windows that fail the escape rule. A larger opening can fix that and make the room safer.

  • Plain glass sits in a risky spot

    Untempered glass next to a tub or a door can break into sharp, heavy pieces. If the opening is being reworked anyway, we put tempered glass in.

How the work goes

  1. 1

    Free in-home estimate

    We walk each opening with you, measure it and talk about what the work involves. You get a written estimate with each window and each task on its own line.

  2. 2

    Permit and order

    New openings and size changes usually need a permit, and we pull it when the job calls for one. Then we order windows built to your measurements.

  3. 3

    Prep and protection

    We cover floors and furniture, set ladders on firm footing and keep kids and pets out of the work area. In homes built before 1978 we use lead-safe practices like plastic sheeting and a HEPA vacuum.

  4. 4

    Set, flash and seal

    The window goes in on the sill pan, gets shimmed level and fastened, then flashed and sealed. The space around the frame gets a gentle, slow-rising foam that insulates without pushing the jambs out of shape. Then we open and close every sash to make sure it runs smooth.

  5. 5

    Finish and walk-through

    We trim out, clean up and show you how each window opens and locks. If there is a permit, we set up the inspection.

What moves the price

Every opening is different, so we price it after we see it. Your estimate breaks each window and each task out on its own line. These are the things that change the number most.

Size and style
Larger windows and styles with more moving parts, like casements, cost more than a small fixed or slider unit.
Glass type
Tempered glass, low-E coatings and dual panes each add to the cost. Some of it is required by code, and we will tell you which.
Condition of the opening
A clean, square opening goes fast. Rotted framing or a crooked opening takes more labor to make right.
Access and height
Second-story windows and openings over a slope need more ladder or staging work to do safely.
Permit and finish work
Permit fees and stucco patching around a new frame add to the total. We list both so nothing shows up later.

Window installation questions

What is the difference between installation and replacement?

Replacement swaps an old window into an existing opening that is still in good shape. Installation covers new openings, changed openings and full-frame work down to the studs. We will tell you which one your home needs at the estimate.

Do I need a permit for new windows?

New openings and changes in size usually do, and the city may inspect the work. We pull the permit when the job needs one and set up the inspection. We will let you know up front if yours does.

Is it safe to have my kids and pets home during the work?

Yes, with a few simple steps. We keep the work area closed off, move glass only when the path is clear, and never leave an open opening unattended. Plan to keep little ones and pets in another room while we work.

Who is responsible if something goes wrong on the job?

We are. We are CSLB C-17 licensed, which covers glazing and window work in California. We also carry $2 million insurance coverage, so your home is protected while our crew is working on it.

Can you work with my builder on an addition or ADU?

Yes. It helps to bring us in while the walls are still being framed. We can confirm rough opening sizes, point out where tempered glass or a bedroom escape window is needed, and order windows that fit the first time.

Is the estimate really free?

Yes. We offer free in-home estimates with no sales pressure or obligation. We measure, explain what we see and leave you a written estimate to think over.

Covered back patio of a beige stucco house with a new black-framed sliding glass door and matching black windows, toolbox and drop cloth on the concrete slab

Planning new windows for your home

Tell us about the addition, the remodel or the window that keeps leaking. We will come out, measure every opening and leave you a written estimate. Take your time deciding. There is no obligation.