ServicesWindow Replacement
Window Replacement in Walnut
We take out worn, drafty or stuck windows and put in new ones that open easily, lock tight and keep the heat out. Your family and pets stay clear of the work, broken glass never sits loose, and we leave the room clean.

New windows, put in the safe way
Window replacement means pulling out the old unit and setting a new one that fits the opening, seals against weather and works the way it should. Most of the windows we replace are old aluminum single-pane units. They get hot in the afternoon sun, they leak air, and the latches wear out.
Safety comes first on our jobs. Glass is heavy and sharp, and old frames can carry lead paint in homes built before 1978. We set up a clear work zone, keep glass handled and stored the right way, and clean up as we go so nobody steps on a shard later.
We are CSLB C-17 licensed and carry $2 million insurance coverage. Our crew brings 30 years of window installation experience, so the day runs on habits, not guesswork.

What your window replacement includes
- 01
Free in-home measuring
We measure every opening ourselves and check the frame and the wall around it. You get a written estimate that lists each window.
- 02
Protected work area
Drop cloths go down inside, and furniture near the window gets moved or covered. We mark off the outside area while old glass comes out.
- 03
Careful removal and haul-away
Old sashes and frames come out in one piece when possible. Broken glass goes straight into a lined bin, and we take all of it with us.
- 04
Code-correct glass
Tempered safety glass goes where code calls for it, such as near doors, tubs and low to the floor. Bedroom windows keep the opening size needed to get out in a fire.
- 05
Sealing and finish
Each window is shimmed level, insulated and caulked so it stays tight. We test every lock and every sash before we leave.
Questions about Window Replacement?
Call(909) 787-1187When your windows are ready to go
Cloudy glass you cannot clean
A dual-pane window with haze trapped inside has lost its seal. No amount of wiping will clear it.
Windows that stick or will not lock
A bedroom window that will not open quickly is a safety problem. So is a latch that no longer catches.
Cracked or loose glass
A cracked pane can fall out when the window slams or the house shakes. Older glass is usually not tempered, so it breaks into sharp pieces.
Hot frames and drafts
Metal frames that are hot to the touch on a summer afternoon let heat pour in. Gaps that whistle in the wind let in dust and cold air too.
Street noise you can hear clearly
Thin single-pane glass does little to block sound. New dual-pane windows make a big difference.
How the job goes
- 1
Estimate and measuring
We come out, check each window and hear what you want. You know your price before anything gets ordered.
- 2
Ordering and scheduling
Your windows are built to the sizes we took. Once they arrive, we pick a day that suits you, and we pull the permit if the city requires one.
- 3
Install day
Floors get covered, the work zone gets set up, and we ask that kids and pets stay in another room. We pull and replace a single window before starting the next, so only one wall opening is ever exposed.
- 4
Cleanup and walkthrough
We vacuum, wipe the sills and take the old units away. Then we go over each new window with you, show you how the locks work and answer your questions.
What moves the price
We give you a number only after we have looked at your windows in person. The written estimate lists each window with its own line, so you can see where the money goes. These are the things that push the total up or down.
- Number and size of windows
- Doing more windows at once usually brings the cost per window down. Big picture windows and unusual shapes take more to build and more hands to set.
- Glass package
- Dual-pane glass, Low-E coatings and tempered glass each add to the price. Some of that is required by code, and we will point out which parts are.
- Retrofit or full frame
- A retrofit sets the new window into the old frame and leaves the stucco alone. Full-frame work costs more but takes care of a frame that is damaged or rotted. Our Window Retrofitting page covers the difference.
- Access and height
- Upstairs windows and narrow side yards mean ladders, staging and extra time so the crew can work safely.
Window replacement questions
How long does it take to replace a window?
Most windows take an hour or two each. A whole house is often finished in one or two days. We will lay out the schedule when we do the estimate.
Does someone have to be there, and how do you keep kids and pets safe?
We ask that an adult is around when we arrive and again for the final walkthrough. While we work, please keep children and pets in a room away from the windows being changed. An open wall and loose glass are the two real hazards, and we keep each one as brief as we can.
Do you have any current offers?
Yes. Window replacement for only $495 per window with free installation (minimum purchase of 4 windows per order; some glass size and product restrictions apply). We will also beat any estimate you get from another contractor holding a state license, or from a USA-made window supplier.
Will you damage my stucco?
On a retrofit install, the stucco stays put and we seal the new window to the existing frame. If we find a frame that is rotted or bent, we will show it to you and go over the options before we touch it.
Will a salesperson pressure me at the estimate?
No. We offer free in-home estimates with no sales pressure or obligation. We measure, tell you what we found and leave the choice to you.

Get your windows looked at
We will measure, check each frame and tell you plainly what needs replacing. You get your quote by phone or at the visit, with no obligation.