Skip to content

CSLB C-17 licensed. Free in-home window estimates: (909) 787-1187

(909) 787-1187

ServicesWindow Retrofitting

Window Retrofitting in Walnut

We take out the old sashes and glass, keep the existing frame in the wall, and set a new window into the opening. Your stucco and drywall stay where they are. We handle broken glass, old paint and sharp edges carefully, and we leave your home clean.

Installer in a navy cap caulking around a white vinyl insert window set inside a weathered wood frame on a stucco house wall, ladder beside him

What Retrofitting Is and When It Makes Sense

A retrofit window is built to fit inside the frame you already have. It has a flat flange that covers the old frame on the outside, so we never have to cut back stucco. It's the usual way to replace windows in a stucco house when the existing frames are still sound.

It fits most homes around Walnut built in the 1970s through the 1990s, where the original aluminum single-pane windows have tired out. If the old frame is bent, rotted or pulling away from the wall, we'll say so at the estimate and talk about full window replacement instead.

We are CSLB C-17 licensed and bring 30 years of window installation experience to each opening. Most of that experience is the quiet stuff: measuring right, handling glass safely and sealing the window so it stays dry.

What the Work Includes

Measuring each opening

We measure every window at three points across and three points down. Old frames are rarely square, and the new window is ordered to the smallest reading so it sits flat without forcing.

Careful glass removal

Old panes come out whole when they can. Cracked glass gets taped first so it doesn't shatter, and our crew wears gloves and eye protection the whole time.

Dust and paint control

Many older homes have layers of old paint on the trim. We lay drop cloths inside and out, mist and wipe instead of dry sanding, and keep debris contained.

Safety glass where code calls for it

Glass near a tub, next to a door or low to the floor needs to be tempered. We check each spot and order tempered glass where it's required.

Sealing and finish

The new frame is set level, screwed into the old frame and sealed around the outside with a flexible caulk that handles summer heat. Inside, we trim the gap so it looks finished.

Cleanup and haul-away

We vacuum, wipe sills and take the old windows and glass with us.

Worker in a cap and tool belt points to a cracked lower window pane on a stucco house wall as the homeowner looks on, with a ladder against the eave

Signs Your Windows Are Ready for a Retrofit

Single-pane aluminum frames
These frames pass heat straight through. Rooms bake in the afternoon and feel cold on winter mornings.
Sashes that stick or won't lock
Worn tracks and rollers make windows hard to open in a hurry. A window you can't open or lock is a safety problem, not just a nuisance.
Fogged or cracked glass
Cracks can spread and drop shards. Fog between panes means a failed seal on an older dual-pane unit.
Condensation and black spots
Water beading on aluminum frames leads to mildew on sills and walls, especially in bedrooms.
Frames still solid
If the old frame is straight and firmly attached, a retrofit is usually the cleaner, simpler choice.

How a Retrofit Day Goes

  1. 1

    Free in-home estimate

    We look at every window, check the frames and note which ones need tempered glass. You get a written quote with no sales pressure or obligation.

  2. 2

    Permit and ordering

    If your city requires a permit, we pull it. Windows are built to our measurements, which takes a few weeks.

  3. 3

    Prep the room

    We move furniture where needed, cover floors and set up a clear path. Kids and pets should stay out of the work area while glass is coming out.

  4. 4

    Remove and install

    Each old window comes out only when its replacement is ready to go right in, so an opening sits empty for minutes, not hours. Most houses are done in a day.

  5. 5

    Final check together

    Before we pack up, we go room to room with you and try each new window. You'll work the latches yourself, see how the screens pop in and out, and we tidy up the last of the dust on the way out.

What Moves the Price

Retrofitting usually costs less than full-frame replacement because there's no stucco or drywall work. Your quote depends on what we find at each opening. We put it all in writing so there are no surprises later.

Number and size of windows
Larger openings need heavier glass and more hands to lift safely. More windows on one order can lower the cost per window.
Window style
Sliders and single-hung windows are the simplest. Picture windows, bays and specialty shapes take more time and material.
Glass package
Tempered glass, Low-E coatings and obscure bathroom glass each add to the cost. Tempered glass is required in some spots, so it isn't optional there.
Access and height
Second-story windows over a slope or a planter bed need ladders or staging set up safely, which adds time.
Condition of the old frame
Small dents can be trimmed over. Real damage may mean that opening needs full-frame work instead.

Window Retrofitting Questions

Will a retrofit make my windows smaller?
A little. The new frame sits inside the old one, so you lose roughly an inch of glass on each side. Most people don't notice once the window is in. We'll point it out at the estimate so you know what to expect.
Is it safe to have my kids and pets home during the work?
Yes, as long as they stay out of the room we're working in. Old glass and sharp frame edges are the main hazards. We keep the work area closed off, carry glass out right away and clean as we go.
Our trim has a lot of old paint on it. Could there be lead?
There could be. Paint put on before 1978 sometimes contains lead, and window trim is one of the likeliest places to find it. We handle that trim carefully: plastic sheeting and drop cloths go down first, we skip dry sanding and power scraping, and we finish with a HEPA vacuum and a wet wipe of every surface.
Who is responsible if something gets damaged?
We carry $2 million insurance coverage. If something goes wrong on the job, it's on us to make it right, not you.
Can every window in my home be retrofitted?
Most can. A frame that's rotted, badly bent or loose in the wall is a poor base for a new window. We check each one and tell you honestly which ones need a different approach.
Do retrofit windows save energy?
Going from single-pane aluminum to dual-pane vinyl with Low-E glass makes a real difference in heat gain. Our Energy Efficient Windows page explains the glass options in more detail.
Covered back patio of a beige stucco house with a new black-framed sliding glass door and matching black windows, toolbox and drop cloth on the concrete slab

Get Your Retrofit Quote

We'll come out, measure every window and tell you plainly what will work. We serve Walnut, Diamond Bar, West Covina and nearby towns.